Get started
Lab analysers and devices

Lab analysers (ASTM and HL7 v2) and MedAppz

Analyser Interfacing takes results straight from your lab analysers over ASTM E1394 or HL7 v2 and files them against the order by tube barcode. It is built; it connects once you run the small agent beside the analyser with an API key and map your test codes.

Built · add your keysEverywhere MedAppz is offered
What it does

What happens through Lab analysers (ASTM and HL7 v2)

  • A small agent in the lab listens to the analyser on its serial line or network port and posts each result.
  • Each result is matched to its order by the barcode on the tube and filed through the normal lab path, so reference ranges, flags and delta checks still apply.
  • A barcode nobody printed, a code nobody mapped or a test the order did not ask for waits in a queue with the reason.
  • Quality-control runs go to Lab Quality Control, never onto a patient.
  • A message sent twice cannot post twice.
Switching it on

What it takes

  1. Step 1Create an API key with the benchlink.post scope. It can post results and nothing else.
  2. Step 2Run the agent on a computer connected to the analyser, and give it the key.
  3. Step 3Register the analyser and map each of its result codes to your test list.
  4. Step 4Run controls and a few known samples before you rely on it.

What it does not do yet

No analyser codes come pre-loaded, because the same code means different tests on different machines. The agent has been tested end to end against a simulator, not yet against a real instrument, so plan a day on site for the first one.
In the store

The apps that use Lab analysers (ASTM and HL7 v2)

Each carries its status from the catalog.

Analyser Interfacing · live in clinicsLab Orders · live in clinicsLab Quality Control · live in clinics
Questions

Asked about this connection

Does MedAppz connect to Lab analysers (ASTM and HL7 v2)?
It is built, and it connects once your clinic adds its own keys. Analyser Interfacing takes results straight from your lab analysers over ASTM E1394 or HL7 v2 and files them against the order by tube barcode. It is built; it connects once you run the small agent beside the analyser with an API key and map your test codes.
How do I switch on Lab analysers (ASTM and HL7 v2)?
Create an API key with the benchlink.post scope. It can post results and nothing else. Run the agent on a computer connected to the analyser, and give it the key. Register the analyser and map each of its result codes to your test list. Run controls and a few known samples before you rely on it.
What does the Lab analysers (ASTM and HL7 v2) connection not do yet?
No analyser codes come pre-loaded, because the same code means different tests on different machines. The agent has been tested end to end against a simulator, not yet against a real instrument, so plan a day on site for the first one.
Related

Read next